Minka Lavery 6952-267B Manuel d'instructions télécharger pdf

INSTALLATION INSTRUCTION FOR 6952

For Wall Mount Light Fixtures

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

Fig.1

PREPARATION

1. Shut off the power at the circuit breaker and

remove the old fixture, including the mounting

hardware.

2. Carefully remove the fixture from the carton and

check that all parts are included as shown in the

illustration.

MOUNTING THE FIXTURE (Fig.1)

3. Secure circular strap (A) to outlet box with the

junction box screws (B) (Size: #8-32*0.6”L)

through the slotted holes in the circular strap (A).

The side of the circular strap (A) marked “GND”

must face out.

CONNECTING THE WIRES (Fig. 2)

4. At this point, connect the electrical wires as shown

in Fig. 2 making sure all wire connectors are

secured. If your outlet box has a ground wire

(green or bare copper) connect fixture’s ground

wire to it. Other wise, connect the fixture’s

ground wire directly to the mounting plate using

the green screw provided. After the wires are

connected, tuck them neatly inside the junction

box.

COMPLETING THE INSTALLATION

5. Mount the fixture body (D) to the circular strap

(A), and then secure with the mounting screws

6. Place the glasses (F) and the cups (G) over the

sockets (E), then secure with the socket rings (H)

with the wrench (I) provided.

7. Install the light bulbs in accordance with the

fixture’s specifications (DO NOT EXCEED THE

MAXIMUM WATTAGE!) (NE PAS DEPASSER

LA PUISSANCE NOMINALE MAXIMALE!)

Your installation is now complete. Return the power

to the junction box and test the fixture.

WRH-T1-51

Set# A-020-117

-Circular strap

-Ground screw

-Mounting screw*2

-Junction box screw*2

Fig.2

SKT-RING-26

For Wall Mount Light Fixtures 1

Résumé du contenu

Page 1 - For Wall Mount Light Fixtures

INSTALLATION INSTRUCTION FOR 6952For Wall Mount Light FixturesWARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COU

Commentaires sur ces manuels

Pas de commentaire

Minka Lavery 6952-267B Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Minka Lavery 6952-267B. Minka Lavery 6952-267B Instructions / Assembly Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Minka Lavery 6952-267B